Version 0.0-1 --> 0.0-2
=======================
The changes are lost in the mists of time.
Version 0.0-2 --> 0.0-3
=======================
The changes are lost in the mists of time.
Version 0.0-3 --> 0.0-4
=======================
The changes may be recoverable, but haven't yet been recovered.
Version 0.0-4 --> 0.0-5
=======================
The changes may be recoverable, but haven't yet been recovered.
Version 0.0-5 --> 0.0-6
=======================
The changes may be recoverable, but haven't yet been recovered.
Version 0.0-6 --> 0.0-7
=======================
The changes may be recoverable, but haven't yet been recovered.
Version 0.0-7 --> 0.0-8
=======================
The changes may be recoverable, but haven't yet been recovered.
Version 0.0-8 --> 0.0-9
=======================
26 February 2009:
Fixed bug in revise.tpm.R; if "mixture" was set to
TRUE in hmm(), this function returned a one-column (!!!)
matrix, not a square one.
So the package was not (ever?) working with "mixture"
set to be TRUE.
Thanks to Mohammad Amin Jamalzadeh for pointing out
this bug.
Version 0.0-9 --> 0.1-0
========================
23 September 2009:
Changed the input format of the y values. Now y should be either a
single vector (of observations) or a list of such vectors. If there
is more than one vector of observations, these should ***not***
be presented as the columns of a matrix. (This is still allowed,
but is deprecated. Allowing the presentation of y as a matrix will
be discontinued in some future release of this package.)
Changed all functions that take observation sequences as an
argument to expect multiple observation sequences to be presented
as components of a list rather than as columns of a matrix.
Thus multiple observation sequences are not constrained to be of
the same length.
Revised hmm() so that it does not insist that the underlying Markov
chain be stationary at time 0. An argument ``stationary'' which
defaults to TRUE (giving the old behaviour) has been introduced.
The value of ``stationary'' is saved in the list returned by hmm().
Revised hmm() so that the observations y are (optionally; default
TRUE) saved in the list returned by hmm().
Revised hmm() so that the set of values of the observations can
be any finite set.
Changed the treatment/usage of the yval argument of hmm() somewhat.
This argument can be any superset of the unique values of the
observations y. Any values in yval which are not matched by any
actually observed values will correspond to rows of the estimate
Rho all of whose entries are 0.
Gave the object returned by hmm() a class --- hmm.discnp ---
assigned, so that the fitted values may be calculated by a
method for fitted().
Created a method for fitted(), fitted.hmm.discnp.
Changed the treatment of the ``y'' argument of mps(); if
this argument is missing, mps() attempts to extract it
from the ``object'' argument.
Removed ``yval'' from the argument lists of mps() and
viterbi.
Revised sim.hmm() to allow the initial state probability
distribution, ispd, to be specified, rather than forcing it to be
equal to the stationary distribution determined by the transition
probability matrix.
Added a ``yvals'' argument to the argument list of sim.hmm()
so that the simulated observations can be from any specified set
of cardinality nrow(Rho). I.e. these observations are no longer
restricted to being in the sequence of integers from 1 to nrow(Rho).
Changed the argument nsim to be a *vector*. Its length specifies
the number of independent sequences generated; its entries specify
the length of each sequence. Deleted the argument ``nrep''.
Added a function pr() which calculates the probability of a state
sequence s given an observation sequence y.
Added a function sp() which returns the probabilities of each state,
at each time point, given the model parameters and an observation
sequence (or sequences). (Added at the request of Murat Ahmed.)
Fixed a bug in viterbi() in respect of the way the values of the
observation vector were matched up with the rows of Rho. Thanks
to Graham Wood for pointing out this bug.
Change tolerance below which probabilities are deemed to be zero from
10*.Machine$double.eps to the more orthodox sqrt(.Machine$double.eps).
Version 0.1-0 --> 0.1-1
=======================
30 November 2009:
Bug fix: The function hmm() threw an error when the observations were
numeric and contained 0 or did not conform to 1:max(observations) (and
argument ``yvals'' was not specified).
Fixed.
(Thanks to Alon Ben Ari for pointing out this bug.)
Bug fix: In revise.rho(), if there were observations missing from the
sequence 1:max(observations), the estimate of Rho would turn into all
NAs and the algorithm would converge instantly. (The consequence was
that all of the f(y) values became NA and were consequently turned
into 1 --- which is *supposed* to happen when y is NA, but not
otherwise. Psigh!)
Fixed.
Changed the .First.lib() function to say ``PLEASE NOTE'' rather
than ``WARNING''.
Version 0.1-1 --> 0.1-2
=======================
21 July 2010:
Thanks to Thomas Lotze for the pointing out the problems requiring
the following fixes:
Bug fix: The length of the k-th replicate sequence (equal to
lns(k)) was not passed to the afun fortran subroutine. Fixed.
Bug fix: If "stationary" was TRUE and then ispd remained NULL,
causing a fortran error. Now ispd is initially set to revise.ispd(tpm)
irrespective of the value of "stationary".
The help page for hmm() was not revised in respect of the way that
the argument "y" should be supplied. It retained the old specification
requiring y to be a matrix, with unequal length replicates adjusted
for by padding with NAs. This has now been remedied.
Version 0.1-2 --> 0.1-3
=======================
23 July 2010
Fixed a glitch in the help page for hmm() in respect of the
description of the ispd component of the returned value.
Fixed another glitch --- multiple ``Warning'' sections.
Fixed a glitch in the documentation of ``mps'' (relating to
the matrix/list dichotomy).
Made a change to pr() allowing "y" to be single observation
sequence when "s" is a list of several state sequences; otherwise
the length of the list "y" must (still) match that of the list "s".
Changed the help file accordingly.
Version 0.1-3 --> 0.1-4
=======================
4 September 2011
Added a function logLikHmm() to calculate the log likelihood
of a set of observations given a fixed set of parameters for
the hidden Markov model. Thanks to Subhajit Dutta for the
suggestion.
Fixed a few minor typos in the documentation.
Version 0.1-4 --> 0.1-5
=======================
4 November 2011
Added a namespace.
Version 0.1-5 --> 0.1-6
=======================
9 February 2012
Fixed a bug which was drawn to my attention by Martin Ellis.
I had omitted coercing "y" to character in ffun(). This coersion
was there in version 0.1-3 but disappeared in version 0.1-4.
This was effected to accommodate the use of the function
logLikHmm() --- but it had repercussions that I didn't twig
to. Have made adjustments so that now "everything" works.
Also made an adjustment to check.yval() to allow for a mismatch in
mode between the y-values and the row names of Rho.
Version 0.1-6 --> 0.1-7
=======================
9 February 2012
Fixed up some infelicities in this ChangeLog.
(Note that version 0.1-6 was never installed on CRAN.)
Version 0.1-7 --> 0.1-8
=======================
2 March 2012
Changed the function sim.hmm() so that storage to hold
the simulated values is completely pre-allocated ***as a
vector***. For simulation of a long (e.g. length = 600000)
single data sequence, this speeds up the simulation process
dramatically. (E.g. from c. 5250 seconds of ellapsed time
to c. 30 seconds of ellapsed time!)
Thanks to Martin Ellis for drawing the problem of slowness
of the simulation procedure to my attention, and indicating
the solution of the problem.
Version 0.1-8 --> 0.1-9
=======================
4 April 2013
Fixed up the dimensioning of Fortran arrays so that they
no longer use dummy 1's as the final dimension.
17 April 2013
Uploaded to CRAN
Version 0.1-9 --> 0.2-0
=======================
30 September 2013
Added the capability to use a different ispd for each
(independent) sequence in the data set.
Uploaded to CRAN
Version 0.2-0 --> 0.2-1
Changed the way non-constant initial state probability
distribution is handled by recurse(); now non-constancy
is detected from the shape of ispd. The logical argument
"cis" is not needed.
Fixed the viterbi() function to avoid ridiculously small
probability values and consequent underflow. Thanks to an
inquiry from Owen Marshall. Either uses logarithms or
normalizes "delta" to sum to 1 (the latter being the default
procedure).
Various other small infelicities fixed.
Uploaded to CRAN 31 January 2014.
Version 0.2-1 --> 0.2-2
Fixed typo (an omitted parenthesis) in fitted.hmm.discnp.Rd.
(02/02/2014)
Augmented the details in fitted.hmm.discnp.Rd to explain the fitted
value concept. (02/02/2014)
Revised code of fitted.hmm.discnp() to (a) make sure that "y" is
a list and to check that all components of the list are numeric.
(02/02/2014)
Fixed up the description of "ispd" in logLikeHmm.Rd and in mps.Rd
to cover the case where ispd is a matrix. (02/02/2014)
Fixed bug which occurred when the observations contained missing
values causing Rho[x,1:ncol(Rho)] to throw a "subscript out of
bounds error. (18/05/2014)
Revised code to make sure that Rho *always* has row names and that
the observations *always* get treated as *character*. (18/05/2014)
Added some example data sets: The Sydney coliform count data and
the Albert et al. multiple sclerosis lesion count data. (18/05/2014)
Changed mat2list() to charList() which does the conversion from
matrix to list (and the whinge-producing) and coerces the y-values
to character. (19/05/2014)
Changed check.yval() to return an emission probability matrix Rho
if the given Rho doesn't have row names. The returned Rho is
equipped with appropriate row names if possible. Otherwise an
error is thrown. (19/05/2014)
Uploaded to CRAN 19/05/2014.
Version 0.2-2 |--> 0.2-3
Made the word "missing" a reserved word (in the function charList()).
(20/05/2014)
Changed the way starting values for ispd are set when "stationary"
is FALSE. Now set ispd[i] = 1/K for all i (irrespective of value
of "cis") whereas previous set ispd[1] = 1 and the rest 0 when cis
was FALSE and set ispd = stationary distribution when cis was TRUE.
(4/08/2014)
Adjusted the return mechanism so that when the number of observation
sequences is 1, the value of "ispd" is a *vector* irrespective of
the value of argument "cis".
(4/08/2014)
Uploaded to CRAN 05/08/2014.
Version 0.2-3 |--> 0.2-4
Fixed bug in respect of the naming of the rows of "Rho"
(the "emissions" probability matrix). Thanks to Harshita
Patak, an enquiry from whom revealed the bug.
(7/04/2016)
Fixed up some other deficiencies in respect of the row and column
names of tpm and Rho; made sure the values of Rho and tpm that are
returned have appropriate row and column names and that the returned
value of ispd is a named vector.
(7/04/2016)
Fixed several problems that occurred if the sorted row names of
Rho were not the same as the original row names.
(8/04/2016)
Changed error trapping to allow the set of unique y values to
be a proper subset of the row names of Rho.
(8/04/2016)
Uploaded to CRAN 08/04/2016
Version 0.2-4 |--> 0.3-0
Major renovation; introduced *bivariate* emissions.
Distributed the actual work amongst three functions:
hmmUV() (univariate), hmmBI() (bivariate independent),
and hmmBD() (bivariate dependent). Initial stage of
renovation completed 03/07/2016.
Renovations continued; adjusted logLikHmm(), check.yval(),
sp(), pr(), mps(), sim.hmm(), and viterbi(). Revised
the help files. Finished this pass 13/07/2016.
Changed revise.Rho() to make a correct estimate of Rho in
the bivariate dependent variables setting. Uses optim().
Not yet tested. 20/07/2016
Checks out OK 22/07/2016
Removed the function sim.hmm() and replaced it by generic
and methods --- rhmm(), rhmm.default() and rhmm.hmm.discnp()
Wrote the appropriate help file.
13/10/2016.
Adjusted the argument list of logLikHmm() (got rid of "par", and
effectively replaced it by "model". Changed the name of argument
"object" to "model" in mps() pr(), sp() and viterbi(). Adjusted help
files accordingly.
13/10/2016.
Built, checked and locally installed 13/10/2016.
Adjusted logLikHmm so that it works if "y" is not supplied,
but "model" is. (Simply by extracting "log.like" from
"model".) 17/10/2016
Fixed a glitch in check.yval.R (used lapply(as.character,yval)
in the type==1 setting).
Made adjustment to logLikHmm.R --- changed "charList" to "tidyList",
and applied mat2charmat.
Same for pr.R, mps.R, sp.R, viterbi.R.
Created function mat2charmat(); changed charList() to tidyList()
(to keep numeric values as numeric).
Adjusted the hmm*.R files; made "keep.y" the responsibility of
hmm(); improved the consistency (between functions) of checking
the validity of arguments; eliminated repetitive code by introduing
for loops.
(25/10/2016)
Made various adjustements to the rhmm simulation functions; fixed
error in rhmm.default() --- incorrect treatment of the dimensions
of Rho; allowed for yval to be passed from rhmm.hmm.discnp to
rhmm.default. Fixed up problem with using length() in settings
where nrow() should have been used.
Created functions() misstify() to insert missing values into
simulated data and nafracCalc() to determine the fraction(s)
of missing values in existing data sets.
Added a "drop=" argument to the extraction of subarrays of Rho
in ffun() to handle the K=1 case properly.
(26/10/2016)
Re-wrote the function revise.rho() to catch various numerical
screw-ups in respect of getting infinite values in log(Rho)
and "G".
Fixed some glitches in hmmUV().
Version 0.3-0 never installed on CRAN
Version 0.3-0 |--> 0.3.1
Added "npar" (the number of fitted parameters) to the object
returned by hmm(), to facilitate doing an automated likelihood
ratio test.
Wrote an anova() method to effect the aforesaid likelihood ratio
test.
(01/11/2016)
Messed about debugging; fixed a major screw up in revise.rho()
that was causing anomalous *decreases* in the achieved log
likelihood with increasing K.
Still doesn't work right; getting crashes, with wll() returning
-Inf.
(05/11/2016)
Version 0.3-1 never installed on CRAN
Version 0.3-1 |--> 0.3-2
Major reworking of revise.rho() to overcome the -Inf problems.
Finally started doing the calculations *right* thanks to a tip
from Chuck Berry on R-help.
Much messing around and debugging, getting revision to check
with a known correct answer.
Fixed another silly mistake in revise.rho().
Got everything to run with K=4.
(08/11/2016)
Added AIC to the list returned by hmm().
Adjusted the help file for hmm() accordingly.
Added "cis" to the list returned by hmm() so
as to accord with the help file.
(08/11/2016)
Adjusted names of a couple of utility functions
in the environment of revise.rho().
Corrected slight bug in the returned value when K=1;
especially in hmmUV().
Adjusted tolerance in the utility function r2zVfun()
(in the environment of revise.rho()). Now using
x > sqrt(.Machine$double.eps) rather than the simplistic
x > 0. Done to prevent singularity of matrix in the
set of equations to be solved for the zetas; seems to
work, so far. (???)
(09/11/2016)
Version 0.3-2 never installed on CRAN
Added BIC value to the list returned by hmm().
Changed the K=1 type=3 estimator to do the correct maximum
likelihood estimator of Rho, rather than just mindlessly using
the crosstabs estimator (i.e. allowing for (x_t,NA) and (NA,y_t)
entries in the data.
(10/11/2016)
Fixed several glitches in the handling of the K=1 case in
hmmBD().
Fixed a screw up involving summing over the wrong index
in ffun().
Similar screw up fixed in ell().
Fixed problem with K=1 case in hmmBD(), hmmBI(), hmmUV();
needed a call to mat2charmat().
(11/11/2016)
Added the argument "warn" to logLikHmm(), mps(), pr(), sp() and
viterbi(). This argument is passed on the utility function
check.yval() which actually issues the warning if warn=TRUE.
(13/11/2016)
Fixed a bug in hmmBI(), in the K=1 case. (Wrong in divisor
used in forming the Rho[[i]] from the tabulation of the respective
columns of the y-matrices.)
Added a componet par0 (the starting values used by the EM algorithm)
to the list returned by hmm().
(14/11/2016)
Version 0.3-3 never installed on CRAN
Version 0.3-3 |--> Version 1.0-0
Started working on allowing dependence of emission probabilities
on auxiliary predictors.
(10/03/2017)
Added the foregoing capacity --- but only in the univariate
setting. In the bivariate settings it is less obvious how to deal
with modelling the dependence of the emission probabilities
on the predictors. Using a multinomial model becomes much less
intuitively appealing. Dealing with missing values of the emissions
appears to be highly problematic.
As indicated above, in the univariate case a multinomial model (using
multinom() from the nnet package) is used to handle the dependence
on the predictors. A different representation/parameterisation of
Rho (as a data frame) is required to accommodate this dependence.
If no predictors are supplied the previous matrix representation
of Rho is still permitted.
Did a lot of adjusting of hmm() code, eliminating redundancies and
adding helper functions to do repeated tasks. Added the capacity
to deal with predictors to functions that are called a posteriori:
sp(), predict(), fitted(), logLikHmm().
Changed the default for keep.y from TRUE to FALSE.
(21/04/2017)
Added a "direct method", using nlm() (so far applicable only
in the univariate setting).
(04/05/2017, ..., 08/05/2017)
Struggled with an anomalous phenomenon: Fitting the K=4 model
to the monocytes data only (univariate) using the direct method
ran (slowly! But it got there.) on my laptop. Tried it on the
Nesi cluster; it crashed on step 73. Used the printed out parameters
from step 72 to restart. It ran through to completion. Put in
try() calls in an attempt to catch the parameters actually causing
the problem. It ran to completion. Put in a different try() and
a stop() call. It again crashed on step 73. Figured out what
was causing the crash, and how to guard against it. Re-jigged
the code with this guard, and set the function running again.
We shall see ....
(08/05/2017)
It ran, but returned a "code" value of *3*.
(09/05/2017)
Made some adjustements to the help files, amongst other things
making them consistent with the (new) possibility of using the
"direct" maximisation method.
(09/05/2017)
More tweaking of help files. Fixed a glitch in revise.ispd().
(10--14/05/2017).
Corrected the value of "npar" to allow for the non-stationary
and non-cis settings.
(15/05/2017).
Modified hmmDirect() to return the covariance matrix of the
parameter estimates if hessian=TRUE was set in the call.
Added example data sets obtained from the "HYDAT" data
base (and discretised to deciles).
04/01/2018
Modified hmmDirect() to use optim() as well as nlm().
Modified rhmm.default() to allow for Rho being a data
frame.
Added example data sets obtained from Prof. Christian Weiß (from
his new book "An Introduction to Discrete-Valued Time Series").
05/01/2018
Set version number to 1.0-0.
06/01/2018
Version 1.0-0 |--> 1.0-1
Added function scovmat() to estimate covariance matrix of parameter
estimates via simulation. Made modifications to the simulation
functions rhmm.default() and rhmm.hmm.discnp(), including adding
the "inMiss" argument to the latter and the "nafrac", "p2" and
"drop" arguments to the former. Changed the meaning of the "nsim"
argument, introduced the "ylengths" argument to serve its old role;
made appropriate modifications throughout. Changed name of "verb"
argument to "verbose". Modified misstify() appropriately.
Added "parity" for the data structure "y" returned by tidyList()
and adjusted hmm() to make use of it.
Changed stop message in respect of "newstyle" in hmm().
Modified the returned value of hmm() and of the hmm*() functions that
it calls. This included adding "parity", "hessian" and "optimiser"
to the list, where appropriate.
Added function (method) update.hmm.discnp(); modified hmm()
to return values needed by update() and by rhmm(), and to
return values in a better organised way.
Modified message produced in the functions called in "First.R".
Wrote documentation for new functions and adjusted old
documentation appropriately.
07/01/2018
Added function squantCI().
Incremented the version number.
08/01/2018
Version 1.0-1 |--> 2.0-0
Started on adding cappacity for using Levinberg-Marquardt
algorithm, 08/02/2018.
Finished (???) add LM capacity to the package 27/03/2018.
(*SUBSTANTIAL* modifications effected.)
Tidied up and checked, 28/06/2018.
Incremented the version number.
28/06/2018
Version 2.0-0 |--> 2.0-1
Fixed up the Sydney coliform count data; now including *only* the
discretised version, and *not* the pseudo-Poisson count version.
Put in the *correct* discretised version (having fixed a fuck-up in
the hglmm "data preparation". Made some adjustments to nafracCalc.Rd.
Incremented the version number.
29/06/2018
Version 2.0-1 |--> 2.0-2
In ffun(), in the type=4 setting, changed the way that calculations
are done when the y value(s) is/are missing.
Changed tidyList() to coerce the y-values into *character* mode.
This fixed a serious bug whereby the dimnames of Rho were not
properly matching (or not matching at all) the y-values when these
were numeric.
Made adjustment so the stopping criterion defaults to "PCLL" for
the EM algorithm and to "ABSGRD" for the LM algorithm.
Made adjustment so that tolerance defaults to 1e-4 for the EM algorithm
and to sqrt(.Machine$double.eps) for the LM algorithm.
Fixed things up so that "digits" gets set (properly) in the subsidiary
hmm* functions (rather than in hmm()).
Changed the "converged" component of the returned value to be *always*
TRUE or FALSE (even when the "bf" method is used). Added an
attribute to "converged", equal to the value of the convergence
criterion returned by the optimiser, when the "bf" method is used.
Adjusted the documentation of hmm() to refer appropriately to optim()
as well as to nlm().
Made other adjustments to the documentation.
Added a component "numeric" to the returned list, TRUE if the original
data were numeric. (Basically for the use of the "fitted.hmm.discnp()"
method.
In the documentation of hmm() fixed up the description of the value
returned.
Added comments in tidyList() clarifying what is going on with
the "numeric" and "character" modes.
Incremented version number.
01/07/2018
Version 2.0-2 |--> 2.0-3
Fixed bug in hmmUV(); had not set "crit" for hmmLM() (when
crit is NULL). 02/07/2018.
Revised way crit is set (obviating the foregoing change) --- went
back to the old way; also "PCLL" is the default used in all non-"bf"
settings, including "LM".
Revised the way tolerance is set --- went back to the old way;
now 1e-4 is the default used in all circumstances.
Fixed up the names of "theta" and the dimnames of the hessian which
weren't getting set properly in hmmLM(). Also fixed up the names
of grad and added grad to the returned value (for hmmLM() and for
hmmNumOpt(); the latter being possible only when the optimiser
is *not* optim(), which does not return the gradient --- only
the hessian. Go figure.)
Made the calculations of the stopping criteria in hmmBD(), hmmBI(),
and hmmUV() (when EM is used) the same as those in hmmLM() --- i.e.
making them all "relative", with tolerance added to the denominators.
Added the final values of the stopping criteria ("stopCrit")
to the returned value (except of course for the "bf" method,
wherein these criteria are internal to nlm() or optim() and
are obscure).
Re-ordered the components of the returned lists a bit.
Incremented the version number.
04/07/2018.
Version 2.0-3 |--> 2.0-4
Revised the way an error in revise.ispd() (multiple eigenvalues
of t(tpm) equal to 1) is treated.
Added a new method "steepest descent" ("SD"), allowing this
method to stand on its own rather than just being used as an
escape hatch when "LM" screws up.
Fixed up a number of anomalies in the documentation of hmm()
(inappropriate references to "EM"). Added an "lmc" argument
to hmm() --- to be passed on to hmmUV() and thence to hmmLM().
Got rid of the unnecessary/erroneously used function newstep().
Incremented the version number.
07/07/2018
Version 2.0-4 |--> 2.0-5
Fixed bug in revise.ispd() --- had "eee$vectors" in error
message; should be "eee$values".
Change conditional browsers() in ffun(), logLikHmm() and
msRho() (in type4stuff.R) to depend on interactive().
Incremented the version number.
10/07/2018
Version 2.0-5 |--> 2.0-6
Adjusted hmmNumOpt() to do a restart from the penultimate parameter
values when it hits a problem with ispd. Stores the penultimate
value in a specially created environment. Not at all clear why
this should "work" but it seems to have an impact.
Added some comments to the functions in directMaxStuff.R, to clarify
their roles.
Incremented the version number.
11/07/2018
Version 2.0-6 |--> 2.0-7
Did some more commenting. Re-indexed the sub-functions if ffun()
to be f1, f2, f3 and f4 (rather than the confusing f0, ..., f3).
Changed the argument "Dat" of f1, f2, f3 and f4 to "Y" to avoid
confusion with list "Dat". (Note that "Y" is one of the *entries*
of "Dat".)
Incremented the version number.
18/07/2018
Version 2.0-7 |--> 2.0-8
Added the capability for hmmNumOpt() to tell nlm() or optim() to
avail themselves of an analytically calculated gradient vector
produced by get.gl(). Whether to do so is specified by an
argument useAnalGrad, which is passed to hmmNumOpt() via the ...
argument. Adjusted the documentation in hmm.discnp-internal.Rd
and hmm.Rd accordingly.
Incremented the version number.
20/07/2018
Version 2.0-8 |--> 2.0-9
Corrected a typo in hydroDat.Rd.
04/08/2018
Fixed a major fuck-up in the calculation of the hessian. An
important term had been omitted.
09/08/2018.
Incremented the version number. (To 2.0-9.)
09/08/2018
Fixed init.c w.r.t. the call to gethgl.
11/08/2018
Fixed a bug that had been lurking in get.hgl.R and getghl.r
(and in get.gl.R and gethl.r) for God knows how long. An
undefined value "nphi" was being passed as an argument to
the Fortran code. This fix eliminated a seg fault that had
been occuring.
13/08/2018.
Later got email from Peter Dalgaard saying that this should
have triggered an "object nphi not found" error --- which it
didn't! I put the code back (???) to the way it was before,
and then of course got that error!
Re-righted the code. Seg fault still "eliminated", so I'll
just carry on.
Incremented the version number. (To 2.0-10.)
16/08/2018
Fixed a bug in tidylist() (the string "colnms" had been
written as "colnames" whence the *function* was found, yielding
a bewildering error.
03/10/2018
Fixed a bug in logLikHmm() --- didn't handle the K=1 case
properly.
03/10/2018
Revised update.hmm.discnp() --- now has a new argment
Kplus1=TRUE which allows fitting a model with K+1 states
starting from a fit to a model with K states. (Thus an
improvement of the log likelihood is guaranteed when K
is increased by 1.)
03/10/2018
Changed the EM algorithm procedure so that if an increase of
the log likelihood occurs, the function switches to the "LM"
method rather than to the "bf" method.
03/10/2018
Incremented the version number. (To 2.0-11.)
03/10/2018
Adjusted update.hmm.discnp() to have arguments "tpm2" and "verbose".
04/10/2018. (No change to version number.)
Changed "decrease in log likelihood" to "increase in log likelihood"
in hmmLM() and hmmSD(). (Duhhh!)
Adjusted hmmLM() and hmmSD() to calculate initial log likelhood
(rather than using -Inf) and to print out the initial value when
verbose=TRUE.
Adjusted hmmUV() to output a blank line after printing the initial
log likelihood value.
22/10/2018. (No change to version number.)
Fixed bug in fitted.hmm.discnp(); object$y produced the object
"ylengths" rather than "y" (and always produced a result, even
if "keep.y" had been set to FALSE) because of partial matching.
Changed this to object[["y"]].
Fixed bug in update.hmm.discnp(); it was effectively applying
tidyList() to the data twice, resulting in the loss of any "numeric"
characteristic (since tidyList() coerces its arguments to "character"
after discerning whether they have "numeric" mode.
Adjusted "tidyList()" so that its returned value is of class
"tidyList".
Adjusted hmm() so that if its "y" argument is (already) of class
"tidyList", then the tidyList() function is *not* applied to it.
Incremented version number. (To 2.0-12.)
23/10/2018.
Adjusted sp() to make use of addIntercept argument in the appropriate
manner.
Adjusted logLikHmm() to make use of addIntercept argument in the
appropriate manner.
Adjusted makeDat() to make use of of prednames and addIntercept
arguments in the appropriate manner. Got rid of the old shaganappi
system for dealing with adding an intercept column to the predictor
matrices. Added "list" to the classes from which the value
of makeDat() inherits.
Added a function checkConstColumns() to deal with problems arising
when adding an intercept and checking for certain anomalies in
the predictor matrices.
Did a major revision of tidyList(); now tidyList() handles adding
an intercept column to the predictor matrices. It is now better
organised in respect of determining whether "addIntercept=TRUE"
actually makes sense. The "prednames" attribute now has "Intercept" as
its first entry whenever the predictors indeed have an intercept.
The "ncol" attribute now counts the intercept column. Added "list"
to the classes from which the value of tidyList() inherits.
Changed hmmUV() so that if there is a predictor matrix (which LM
can't handle --- yet???) it switches to the "bf" method when the
EM algorith produces a decrease in the log likelihood. Put in
error-throws if hmmUV() is called with method = LM or SD, when
there is a predictor "X".
Major revision to updata.hmm.discnp() so that it deals properly
with auxilliary predictor variables "X". It now handles the
K=1 case properly, even when there are predictor variables.
Adjusted init.all() to conform properly to the new structure
of the output of tidyList(). It now uses "prednames" to
construct the column names of the Rho dataframe. The "ncX"
argument (number of columns of X) is no longer used, and
neither is "addIntercept".
Incremented the version number. (To 2.0-13.)
29/10/2018
Adjusted revise.rho() to use the "prednames" attribute of "Dat"
to form the column names of Rho.
Fixed bug (w.r.t. augmenting "prednames" with "Intercept") in
checkConstColumns().
Did major revision/bug-fix of tidyList() to handle the "prednames"
structure properly. In particular corrected the way "prednames"
is formed if entries of "X" have no column names.
Adjusted makeDat() to provide a "prednames" attribute when "X"
is NULL.
Amended the hmm() help to specify the restrictions/conditions
that the "X" argument (if present) must satisfy.
Incremented the version number. (To 2.0-14.)
31/10/2018
Fixed bugs in misstify(). (Wrong order of application of
fix1() and fix2().)
Fixed bugs in rhmm.default() (was using x[j] rather that x[[j]],
where "x" is a list, in some instances).
Revised the argument structure of misstify() (and hence of rhmm.*()).
Replace the shaganappi "p2" by "fep" (first entry present). Provided
sensible default values of the entries of fep.
Revised the help for rhmm() and misstify().
Added the data set "ccprSim" which consists of data simulated from
a model fitted to a real data set which has to be kept confidential
due to ethical constraints.
Incremented the version number. (To 2.0-15.)
01/11/2018
Fixed bug in makeDat (assigned attribute "rhovals" to the returned
structure when type is 2).
Re-did hmmNumOpt so that if nlm() falls over, the function switches
to using optim() rather the previous shaganappi procedure of retrying
nlm() from a previous iterate of the parameter vecot. (This latter
procedure should never work anyway!)
Introduced the argument "hessian" indicating whether a hessian matrix
should be returned by nlm() or optim(). Defaults to FALSE which saves
a huge amount of frustrating time at the end (between completion of
iterations and actually returning a value). It appears that this
final calculation of the hessian is *very* time consuming.
Incremented the version number. (To 2.0-16.)
04/11/2018
Improved the logical flow, instigated by an error thrown when
the get.{hgl,gl,l}() functions could not find the "rhovals"
(the unique values of the emissions) due the object returned
by makeDat() being incorrectly structered. If it was right
for some circumstances it was wrong for others, under the old
(shaganappi) logial flow.
* Reorganised tidyList().
* Reorganised makeDat().
* Reorganised get.l().
* Reorganised get.gl().
* Reorganised get.hgl().
* Reorganised ffun().
* Adjusted hmmUV().
* Adjusted hmmBI().
* Adjusted logLikHmm().
* Adjusted sp().
In particular, the object returned by tidyList() now always has a
"lvls" (formerly "uval") attribute so that makeDat() can get the
levels of the factor in the "y" column from that attribute and they
no longer have to be passed as an argument.
The makeDat() function now just returns data frames whose
nature depends only the parity (which is an attribute of the "y"
argument) and not on "type" so type no longer has to be passed
as an argument.
Incremented the version number. (To 2.1-1.)
06/11/2018
Fixed some bugs in get.*.R involving a missnaming of the "rhovals"
attribute of a "madeDat" object.
Changed name of the "rhovals" attribute in the makeDat() function
to "lvls" to make it consistent with tidyList().
Added an acknowledgement of Prof. Kurt Brännäs in the documentation
of the data from Prof. Weiß's book.
Incremented the version number. (To 2.1-2.)
07/11/2018
Fixed a bug in ffun(), type 3. The columns of Y must be passed
to f2() as Y[,1,drop=FALSE] and Y[,2,drop=FALSE], since f2() is
expected data frames, not factors.
Fixed a bug in init.all() --- need to have the ncol argument of
matrix() equal to nval[i], *not* nval. (If the vector nval
is passed, the *first* entry of nval is used, equivalent to always
using nval[1].)
Fixed hmmBI() to resolve conflict/inconsistency between the
"yval" argument and rownames(Rho[[i]]) if Rho is given in
par0. The row names of the components of Rho now take precedence.
Fixed hmmBD(), in a manner similar to that with which hmmBI()
was treated above, to resolve conflict/inconsistency between the
"yval" argument and dimnames(Rho) if Rho is given in
par0. The dimnames attribute of Rho now takes precedence.
Put in a check on the adequacy of the data (must have at least
*one* completely non-missing combination of the values of variable
1 and variable 2) in hmmBD().
Found a really bad error in hmmBI() --- the non-redundant parameters
from Rho were being extracted completely incorrectly! Fixed.
Incremented the version number. (To 2.1-3.)
10/11/2018
Fixed a numerical instability in derivp() that was causing
errors to be thrown. Fixed a similar instability in derivf()
(although this had not --- yet --- triggered any errors).
Incremented the version number. (To 2.1-4.)
19/11/2018
Fixed a bug in hmmUV(); wrong "yval"/"lvls" value were being used
if the unique value of the observations did not "fill out" all of
the rownames of par0$Rho (or all of the levels of par0$Rho$y if
the "newstyle" structure was being used. As for hmmBI() and hmmBD()
above, made the charcteristics of par0$Rho take precedence.
Fixed a bug in hmmUV() which occurred when newstyle==TRUE. In the
call to multinom() problems arose if not all of the "lvls" values
actually appeared in the data. Suppressed the warnings coming
from multinom() and arranged the values of "lvls" corresponding to
absent data to get supplied with large negative values (making the
corresponding probabilities equal to zero --- as they should be.)
Fixed a bug in hmmUV() w.r.t. the switch to method="LM" if there is
a *decrease* in the log likelihood. The data "Dat" were being
(now completely unnecessarily) being restructured, which was
mucking up the call to get.l(). Eliminated the restructuring.